Josco Grinding and Sanding


Josco Adaptor Drill to M14


Drill to angle grinder adaptor.

This product allows you to use angle grinder
tools on your drill.
Drill must be run in forward direction only.

Suits M14 threads.


Product Code: BDBPA



More Info £4.13




Brumby 115mm Zirconia Flap Disc 40G


For stock and weld removal, grinding and clean-up work.


Brumby Zirconia Flap Discs are ideal for use in stock and weld removal, plus grinding and clean-up work on aluminium, steel, cast iron and most metals.



Flap Discs have primarily been designed to replace sanding discs. No backing pads are required with Brumby flap discs – they fit directly onto your angle grinder. Due to the cushioning effect of the cloth, a disc one or two grades coarser can be used for maximum rate of stock removal and still achieve a finer finish than what would be obtained with a sanding disc. Grinding marks are less likely to show through paint, epoxy or stove enamel coatings.



Flap Discs work best with light pressure, letting the speed of the machine do the work rather than the operator, as the laminated flaps stay sharp until the disc is completely worn out.


Product Code: BDZ11540



More Info £3.85




Brumby 115mm Zirconia Flap Disc 60G


For stock and weld removal, grinding and clean-up work.


Brumby Zirconia Flap Discs are ideal for use in stock and weld removal, plus grinding and clean-up work on aluminium, steel, cast iron and most metals.



Flap Discs have primarily been designed to replace sanding discs. No backing pads are required with Brumby flap discs – they fit directly onto your angle grinder. Due to the cushioning effect of the cloth, a disc one or two grades coarser can be used for maximum rate of stock removal and still achieve a finer finish than what would be obtained with a sanding disc. Grinding marks are less likely to show through paint, epoxy or stove enamel coatings.



Flap Discs work best with light pressure, letting the speed of the machine do the work rather than the operator, as the laminated flaps stay sharp until the disc is completely worn out.


Product Code: BDZ11560



More Info £3.85




Brumby 115mm Zirconia Flap Disc 80G


For stock and weld removal, grinding and clean-up work.


Brumby Zirconia Flap Discs are ideal for use in stock and weld removal, plus grinding and clean-up work on aluminium, steel, cast iron and most metals.



Flap Discs have primarily been designed to replace sanding discs. No backing pads are required with Brumby flap discs – they fit directly onto your angle grinder. Due to the cushioning effect of the cloth, a disc one or two grades coarser can be used for maximum rate of stock removal and still achieve a finer finish than what would be obtained with a sanding disc. Grinding marks are less likely to show through paint, epoxy or stove enamel coatings.



Flap Discs work best with light pressure, letting the speed of the machine do the work rather than the operator, as the laminated flaps stay sharp until the disc is completely worn out.


Product Code: BDZ11580



More Info £3.85




Brumby 127mm Zirconia Flap Disc 40G


For stock and weld removal, grinding and clean-up work.


Brumby Zirconia Flap Discs are ideal for use in stock and weld removal, plus grinding and clean-up work on aluminium, steel, cast iron and most metals.



Flap Discs have primarily been designed to replace sanding discs. No backing pads are required with Brumby flap discs – they fit directly onto your angle grinder. Due to the cushioning effect of the cloth, a disc one or two grades coarser can be used for maximum rate of stock removal and still achieve a finer finish than what would be obtained with a sanding disc. Grinding marks are less likely to show through paint, epoxy or stove enamel coatings.



Flap Discs work best with light pressure, letting the speed of the machine do the work rather than the operator, as the laminated flaps stay sharp until the disc is completely worn out.


Product Code: BDZ12740



More Info £4.40




Brumby 127mm Zirconia Flap Disc 60G


For stock and weld removal, grinding and clean-up work.


Brumby Zirconia Flap Discs are ideal for use in stock and weld removal, plus grinding and clean-up work on aluminium, steel, cast iron and most metals.



Flap Discs have primarily been designed to replace sanding discs. No backing pads are required with Brumby flap discs – they fit directly onto your angle grinder. Due to the cushioning effect of the cloth, a disc one or two grades coarser can be used for maximum rate of stock removal and still achieve a finer finish than what would be obtained with a sanding disc. Grinding marks are less likely to show through paint, epoxy or stove enamel coatings.



Flap Discs work best with light pressure, letting the speed of the machine do the work rather than the operator, as the laminated flaps stay sharp until the disc is completely worn out.


Product Code: BDZ12760



More Info £4.40




Brumby 127mm Zirconia Flap Disc 80G


For stock and weld removal, grinding and clean-up work.


Brumby Zirconia Flap Discs are ideal for use in stock and weld removal, plus grinding and clean-up work on aluminium, steel, cast iron and most metals.



Flap Discs have primarily been designed to replace sanding discs. No backing pads are required with Brumby flap discs – they fit directly onto your angle grinder. Due to the cushioning effect of the cloth, a disc one or two grades coarser can be used for maximum rate of stock removal and still achieve a finer finish than what would be obtained with a sanding disc. Grinding marks are less likely to show through paint, epoxy or stove enamel coatings.



Flap Discs work best with light pressure, letting the speed of the machine do the work rather than the operator, as the laminated flaps stay sharp until the disc is completely worn out.


Product Code: BDZ12780



More Info £4.40







1 | 2 | 3 | 4 | Next > >